dc.contributor.advisor | Khademi, Naeem | |
dc.contributor.author | Grimstad, Nikolas Cameron | |
dc.contributor.author | Kase, Simen Graue | |
dc.contributor.author | Brandasu, Stephan Frederik Werner | |
dc.date.accessioned | 2021-09-07T16:29:34Z | |
dc.date.available | 2021-09-07T16:29:34Z | |
dc.date.issued | 2021 | |
dc.identifier | no.uis:inspera:78872743:36665376 | |
dc.identifier.uri | https://hdl.handle.net/11250/2774387 | |
dc.description.abstract | Denne oppgaven gir en løsning for utfordringen med nøyaktig innendørs posisjonering.
Ved å bruke både kommersielle Bluetooth Low Energy (BLE) beacons og vår egen Do It
Yourself (DIY) beacons, ved hjelp av ESP32, kunne vi sammenligne disse løsningene
i forskjellige miljøer.
Et todimensjonalt (2D) innendørs posisjoneringssystem (IPS) ble satt opp i gangen
av Kjølv Egeland-bygget ved Universitetet i Stavanger.
Test ble kjørt både før og etter implementering av IPS, og selv om
vi var bare i stand til å kjøre en begrenset mengde tester, viser resultatene at en IPS
kan være en levedyktig løsning. | |
dc.description.abstract | This thesis provides a solution for the challenge of accurate indoor positioning.
Using both commercial Bluetooth Low Energy (BLE) beacons and our own Do It
Yourself (DIY) beacons, using ESP32’s, we were able to compare these solutions
in different environments.
A Two-dimensional (2D) Indoor Positioning System (IPS) was setup in the hallway
of the Kjølv Egeland building at the University of Stavanger.
Test were run both before and after implementation of the IPS, and even though
we were only able to run a limited amount of tests, the results show that an IPS
could be a viable solution. | |
dc.language | eng | |
dc.publisher | uis | |
dc.title | Innendørs Posisjoneringssystem for IDE ved bruk av Bluetooth Low-Energy Beacons | |
dc.type | Bachelor thesis | |