Blar i Studentoppgaver (TN-IKM / TN-IMBM) på tittel
Viser treff 123-142 av 1214
-
Assessment of critical factors when running and retrieving Framo pump modules through moonpool
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)The scope of this Master Thesis was to assess critical factors when running and retrieving Framo pump modules through the moonpool of a vessel. The thesis has been presented in a twofold manner. The first part thoroughly ... -
Assessment of critical factors when running and retrieving Framo pump modules through moonpool
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)The scope of this Master Thesis was to assess critical factors when running and retrieving Framo pump modules through the moonpool of a vessel. The thesis has been presented in a twofold manner. The first part thoroughly ... -
Assessment of current work process and improvement recommendations for spare part management used in modification projects
(Master thesis, 2021)The oil & gas industry is under immense pressure to stay competitive, bringing out the demand to keep cost at a minimum and quality at a maximum. This determination and current market demand force organizations to continuously ... -
Assessment of environmental contour methods in prediction of long-term extreme responses of conceptual multi-rotor wind turbine
(Master thesis, 2021)Determination of long-term extreme responses caused by environmental conditions is vital for the assessment of the design of offshore systems. The full long-term analysis (FLTA) is considered the most accurate approach for ... -
Assessment of inherent workload analysis process for digitalisation and effect of further CBM implementation.
(Master thesis, 2022)The unstable geopolitical situation in Europe has caused a high demand for energy resources and significant fluctuations in the price of these. This has affected the backbone of the Norwegian economy, its oil and gas ... -
Assessment of moisture damage in domestic buildings in Norway
(Bachelor thesis, 2021) -
Assessment of necessary airgap of a semisubmersible using a Peak-Over-Threshold long term analysis
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06-10)The airgap of a column stabilized floating structure is the distance from a point on the underside of the deck to the water level instantly and directly below it; when the sea is not calm, it varies with time and for ... -
Assessment of technical building blocks for the development of Leningradskoe field in the Kara Sea
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06-15)As existing oil and gas fields’ productivity is depleting, operators in the oil and gas industry are always searching for new prospects of reserves. Due to this reason, the Arctic shelf is becoming more important than ever, ... -
Asset Digitalization, Change, and Psychological Adaptation: A Study of Human Response Patterns under Integrated Operations
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-06-15)The oil and gas industry is globally and geographically dispersed, some operations are in remote, politically, and economically unstable locations. Therefore, it is critical that companies maintain their production in a ... -
Asset Management in the oil and gas sector - possibilities related to asset management as a management philosophy for offshore assets
(Master thesis, 2015-06)During the period 2008 – 2013, globalization and new business environments created new challenges and a more demanding business context. The oil and gas industry on the Norwegian Continental Shelf, which is one of the most ... -
Asset Management Practices in Norwegian Industrial Sectors
(Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06)Several industrial sectors in Norway have been subjected to challenging industrial conditions in recent years, due to factors such as declining markets and large market fluctuations. On top of these challenging industrial ... -
“Asset Partner” Service model – Challenges and Opportunities for service industry. - A case from Norwegian Continental Shelf (NCS)
(Master thesis, 2023)The oil and gas (O&G) industry is facing numerous challenges, including fluctuating oil prices, increasing regulatory pressures, and a growing demand for cleaner energy sources. To remain competitive and maximize value ... -
Assuring asset integrity through improving the accuracy of leakage source identification of a permanently installed subsea leak detection system using artificial neural networks
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06)Environmental concerns and regulatory controls for oil and gas exploration and production activities have been increasing with the prospecting of deep-water fields and sensitive areas, such as the artic seas. To stop any ... -
At the Crossroads: Multidiscipline Integration and Coordination in an EPC Contract: A Resurgence of Challenges and Strategic Improvement Opportunities
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2012)Over the years, the faculty of Project management contributed excellent methodologies through a set of constituted guidelines that are applicable for smooth execution of projects in every industry. They are broadly based ... -
Automatiseringsalternativer til dyseplateskifte på ekstruderingspresse
(Masteroppgave/UIS-TN-IKM/2009, Master thesis, 2009)Skretting A/S er Norges største fiskefôrprodusent. Produksjonen av fôrpellets foregår i en ekstruderingsprosess. Fôret blir presset ut som strimler gjennom en dyseplate som er montert i fronten på en kvern. Bak dyseplaten ... -
Ballast Control Analysis of a Floating Dock under Accidental Conditions
(Master thesis, 2023)Floating docks play a critical role in the maintenance and inspection of submerged sections of ships. However, their operational complexity requires the expertise of a skilled dock master to develop an optimal ballast plan ... -
Basic design of subsea BOP stack with RCD for riserless drilling
(Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013)Reelwell Riserless drilling concept has been proposed to overcome the economic challenge of drilling through the thick salt layer. The concept shall bases on RDM method, which is a new drilling method with the concentric ... -
Bedømmelse av gjenbruksalternativer for betongelementer
(Master thesis, 2023)This master´s thesis focuses on studying the possibilities of reusing existing concrete elements and the associated challenges. To address this, the thesis has developed a framework with the purpose of facilitating reuse ... -
Bedømmelse av gjenbruksmuligheter for betongelementer
(Master thesis, 2023)This master´s thesis focuses on studying the possibilities of reusing existing concrete elements and the associated challenges. To address this, the thesis has developed a framework with the purpose of facilitating reuse ... -
Behavior of steel beams subjected to LTB at elevated temperature/Fire
(Master thesis, 2022)When the steel beam is subjected to fire, there are great chances for the steel beam to decrease its stiffness due to which the flexural and lateral torsional buckling capacity (LTB) properties of respective steel beam ...