Blar i Studentoppgaver (TN-IKM / TN-IMBM) på tittel
Viser treff 1059-1078 av 1213
-
Study of the module handling system on Seven Viking
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)Subsea installations is a vital part of the oil and gas industry, but as have also been a major cost factor. When the oil price decline, subsea installations are one of the first fields to be affected. The priority to cost ... -
Study of vessel performance in extreme loading conditions for a new built offshore construction vessel during installation of flexible flowline
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-16)A new built vessel need to carry out extensive sea trials before being put in what could be considered as “normal operation”. This is done to make sure the capabilities of the vessel are known to the vessel’s crew, captain, ... -
Study of weld design and cost versus fabrication cost
(Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013)Increasing demand in economic- and time-efficiency, in the production and design phase, has led to the question if there is a possibility to save time and money on a more detailed analysis on which weld type to use. The ... -
Study on Development Strategies of a Small and Medium-sized Enterprise in Dynamic Environment
(Masteroppgave/UIS-TN-IMBM/2018;, Master thesis, 2018-03)The role of SMEs in promoting economic prosperity and solving employment has become increasingly evident. In the large-scale trade of industrial products, SMEs can also play their unique role and form a new impetus for ... -
Study on Digitalization in Industry: Requirements and Assessment
(Masteroppgave/UIS-TN-IMBM/2018;, Master thesis, 2018-06)Digitalization is a way of companies preparing for the future. Most large established enterprises embark on the digitalization process without a sense of direction. This research will provide a way forward for the ... -
Study the behavior of prestressed concrete deep beams using FEM simulations
(Master thesis, 2023)The objective of this master‘s thesis is to study and analyze the behavior of prestressed concrete deep beams and how prestressing changes the strut and tie model. The method used for analyzing the behavior is finite ... -
Study to determine which turbulence models are best suitable for offshore enviroment in non-neutral conditions
(Master thesis, 2023)Wind turbines have been experiencing a rapid development over the years and there has been a shift from onshore to offshore which has been due to many reasons as will be discussed in the introduction. The lateral and ... -
Subsea control system for all-electric Xmas trees
(Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013)When looking at a time line from the earliest days of offshore oil and gas production developments, present day development projects and field layouts have changed tremendously. Within the offshore oil and gas industry ... -
Subsea gas transition hubs
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-15)Gassco is the operator of two platforms with gas transport functions. These platforms are getting old and require large modifications to extend the lifetime and maintain their functions. Rapid development in subsea technology ... -
Subsea in the Kara Sea
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)In this master’s thesis the application of subsea technology in the Kara Sea were described. Using date for one perspective structure, several scenarios of field’s development were observed; the most important recovery ... -
Subsea inspection and monitoring challenges
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)This paper uncovers and suggests solutions for the challenges to control change over time more reliable and cost effective. Front-end concept engineering, design, inspection and monitoring strategies, technologies, systems ... -
Subsea Pipeline Design Features on the Russian Shelf Conditions
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06)Today in Russia, more than 75% of the explored onshore oil and gas fields are involved in the development, and their reserves have been produced at least by half. New discovered deposits are less and less, and their resources ... -
Subsea standalone vehicle system for Snorre
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)The rig manager on Snorre B, a semisubmersible production and drilling rig for Statoil, has expressed the need for a subsea standalone vehicle that can perform specific tasks when the conventional remote operated vehicles ... -
Subsea Template Lifting Operations in the Sea of Okhotsk
(Masteroppgave/UIS-TN-IMBM/2018;, Master thesis, 2018-06-14)Sea of Okhotsk is characterized by harsh environmental conditions. The navigation period lasts approximately 5 months (June – October). Sea ice starts to form in November with 0.8-1.1 m thickness. Vessel icing is possible ... -
Subsea Tie-in, design solutions and optimisation methods
(Master thesis, 2015-06-15)Subsea Tie-in Systems is used to connect pipes between subsea structures in the offshore oil and gas industry. Subsea Tie-in system has been developed for many decades by the industry, and is used throughout the world in ... -
Suction effect of skirted mud mat of GRP covers under wave loads
(Master thesis, 2023)To mitigate potential risks of soil and structural failures in offshore foundation systems, it is crucial to examine seabed soil behavior near the structure especially near the skirtfaces under dynamic wave loads. This ... -
Suggested design for transport and installation of offshore wind turbines
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)The state of the art today of transporting and installing offshore wind turbines is a costly endeavor, therefore, it is needed with new designs to reduce the time and cost of such operations. A new design has been presented ... -
Suggested improvements for ship-installation collision risk models to reflect current collision avoidance systems
(Masteroppgave/UIS-TN-IKM/2010;, Master thesis, 2010)Accurate quantification of risks for vessel-to-platform collisions has been a goal of the petroleum industry for many years; however, technological advances in collision avoidance systems have not been reflected in current ... -
Sustainability-based development of local food service in a hypermarket context: A case study in Finland
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)Food retailing is one of the most diverse and dynamic sectors in developed societies, offering a seemingly increasing range of food and services to consumers. Food retailers have recently started taking sustainable initiatives ... -
Sustainable design of reinforced concrete slab bridges using CO2 emission optimization.
(Master thesis, 2022)Det har i det siste blitt mer fokus på miljø og bærekraft ved prosjektering av bygge- og anleggsprosjekter. I den siste utgaven av håndbok N400 for bruprosjektering, som ble utgitt januar 2022, er det stilt et nytt krav ...