Blar i Studentoppgaver (TN-IKM / TN-IMBM) på tittel
Viser treff 1099-1118 av 1213
-
The effect of injecting CO2 in fresh concrete with different content of slag in the binder.
(Master thesis, 2021) -
The effect of using aplite as a cementitious material
(Masteroppgave/UIS-TN-IKM/2009;, Master thesis, 2009)The compressive strength of cement cubes containing aplite with different grain size distributions was measured. Varying degrees of milling and particle size reduction was looked upon. The aplite containing cubes were than ... -
The effects of CO2 on fresh and curing fly ash concrete
(Master thesis, 2021)Using CO2 as an addition in concrete is a technological advancement made possible by CO2 curing techniques and injection of CO2 during mixing. The benefits involve potential for CO2 storage by hydration, reduction of clinker ... -
The effects of tempering temperature and direct hardening on mechanical properties of 35M13B and 30M12CB
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06)In this work the mechanical properties of the wear parts with respect to the different heat treatments applied have been investigated. Two different alloys and a total of nine different heat treatment procedures were tested. ... -
The impact of digital disruption in the maintenance service industry, in the oil and gas sector
(Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-12-15)The industry is on the brink on what many consider as paradigm shift due to disruptive technological developments. The current trend of automation, Internet of things, big data analysis, cloud computing, together with the ... -
The Impact of Non-Surface Layer Wind Profiles on the Loads and Motions of Offshore Wind Turbines
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019)This master thesis analyzes the influence of wind speed and variation in mean wind profiles on the loads and motions of offshore wind turbine. Primarily, fully-scale measurement data from the research platform FINO3 in ... -
The Influence of an Unstable Turbulent Wind Spectrum on the Loads and Motions on a Floating Offshore Wind Turbine
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06)Floating offshore wind turbines are exposed to harsh environmental conditions throughout their lifetime and typically experience unstable atmospheric conditions. Including the effect of atmospheric stability should improve ... -
The manufacturing industry transition from traditional manufacturing to a smart factory: Role of 3rd party service providers.
(Master thesis, 2023)This thesis explores the role of 3rd party service providers in the transition from traditional manufacturing to smart factory. The research investigates the challenges and opportunities associated with a digital transformation ... -
The practical use and further opportunities of BIM
(Master thesis, 2022)Digitalization is and have been central for some time now, and this is also represented in part by BIM in the building, construction, and property. The need for a more efficient and cost reduced sector is constant for this ... -
The role and use of expert systems for offshore assets on the Norwegian continental shelf: status quo and value creating measures
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)The ultimate goal of collaborative operating environments is value creation. All over the world, Expert Systems (ES) are being employed by various industrial sectors to foster this value creation process. Subsequently, ... -
The scalability of floating wind installations in Norway and beyond
(Master thesis, 2022)Offshore wind energy has recently become a big industry in many countries [89]. However, offshore floating is still at the beginning of its commercial use, and the number of projects under development has increased. Future ... -
The significance of Froude number in vertical pipes : a CFD study
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)The main objective is to develop a simulation model in OpenFOAM which can be used to study the transition from pressure to gravity driven flow in vertical pipelines. A pump is connected upstream, ensuring pressure driven ... -
Thermo-Mechanical Based Residual Stress and Distortion Visualization Using Analytical, Graphical, and FEM Based Numerical Method
(Master thesis, 2021)The arc welding process is the main fusion welding process used in the offshore industry. This thesis attempts to understand the residual stress and distortion issues attributed to welding, and the study aims to bring a ... -
Thermo-Mechanical Based Residual Stress and Distortion Visualization Using Analytical, Graphical, and FEM Based Numerical Methods
(Master thesis, 2021)The arc welding process is the main fusion welding process used in the offshore industry. This thesis attempts to understand the residual stress and distortion issues attributed to welding, and the study aims to bring a ... -
Three-dimensional Numerical Simulations and Proper Orthogonal Decomposition Analysis of Flow Around a Flexibly Supported Circular Cylinder
(Master thesis, 2021)Numerical simulations of turbulent flow around stationary and vibrating cylinders at Re = 3900 are performed using the Large Eddy Simulation (LES) approach. Detailed convergence and validation studies confirm feasibility ... -
Tie-in spools - a verification study
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)Within the Oil industry, subsea pipelines are used to transport hydrocarbons from one location to another. After the installation of a subsea pipeline, the final connection between the pipeline ant the interconnecting ... -
Tilslagets effekt på sprøytebetongens pumpbarhet
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-12)Betongen er i stor grad påvirket av tilslaget den er laget med. Hvilke egenskaper tilslagene har og hvordan man setter sammen forskjellige tilslag påvirker i stor grad utførelsen og sluttresultatet. Samtidig er det et økt ... -
Tilstandsovervåking av bruer: Inspeksjon, Vurdering og Reparasjonsteknikker
(Bachelor thesis, 2021)Denne bacheloroppgaven tar for seg tilstandsovervåking, inspeksjon, vurdering og eventuelle repareringsteknikker som kan utføres på bruene. Bruer blir fremstilt for å bære på store dynamiske laster over lengre tid, samtidig ... -
Tilstandsovervåking av kritiske isoleringsventiler på Valhall og Skarv
(Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013)Tilstandsovervåking av kritiske isoleringsventiler er et tiltak som BP Norge har initiert for å forbedre tilstandskontrollen på produksjonsanleggene Valhall og Skarv, slik at en kan få bedre driftsregularitet og redusert ... -
Tilstandsvurdering av gammel stålbjelkebru og dimensjonering av ny betongbru
(Masteroppgave/UIS-TN-IMBM/2018;, Master thesis, 2018-06)Oppgaven omhandler inspeksjon, bruklassifisering og tilstandsvurdering av Husmo bru. I tillegg tar oppgaven for seg dimensjonering av en ny betongbru. I Norge er det kommunene som har ansvaret for drift og vedlikehold ...