Blar i Studentoppgaver (TN-IKM / TN-IMBM) på tittel
Viser treff 118-137 av 1213
-
Assessing slamming loads from breaking waves
(Master thesis, 2014-06-27)Recent studies show that, the load from breaking waves gives largest impact on the platform columns. If these impacts not carefully estimated and designed, they can cause a severe damage to the platform structures. The ... -
Assessing wave conditions in a Norwegian fjord
(Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-07-13)The focus of this thesis is to obtain an estimate of the significant wave height together with the corresponding peak period for the proposed bridge locations at Bjørnafjord. The task was conducted by modelling and ... -
Assessment method for review of existing maintenance strategies based on reliability, availability, risk, and cost parameters
(Master thesis, 2017-06)Maintaining assets is a fundamental part of any industrial facility. Oil and gas operators are often using advanced maintenance strategies, but the strategies are usually built preoperation and not systematically updated ... -
Assessment of challenges due to moisture during service life of residential buildings
(Bachelor thesis, 2021)This thesis has looked at and assessed the various challenges with moisture and moisture damage in Norwegian residential buildings.\\ In this relation, a review has been made of current statistics and reports within ... -
Assessment of corroded steel H and I Column in a steel bridge
(Master thesis, 2022)Corrosion is a significant problem in the deterioration of steel bridges, causing a loss of area, leading to failure modes such as fracture, yielding, and buckling—reduced structural bearing capacity. Corrosion combined ... -
Assessment of critical factors when running and retrieving Framo pump modules through moonpool
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)The scope of this Master Thesis was to assess critical factors when running and retrieving Framo pump modules through the moonpool of a vessel. The thesis has been presented in a twofold manner. The first part thoroughly ... -
Assessment of critical factors when running and retrieving Framo pump modules through moonpool
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)The scope of this Master Thesis was to assess critical factors when running and retrieving Framo pump modules through the moonpool of a vessel. The thesis has been presented in a twofold manner. The first part thoroughly ... -
Assessment of current work process and improvement recommendations for spare part management used in modification projects
(Master thesis, 2021)The oil & gas industry is under immense pressure to stay competitive, bringing out the demand to keep cost at a minimum and quality at a maximum. This determination and current market demand force organizations to continuously ... -
Assessment of environmental contour methods in prediction of long-term extreme responses of conceptual multi-rotor wind turbine
(Master thesis, 2021)Determination of long-term extreme responses caused by environmental conditions is vital for the assessment of the design of offshore systems. The full long-term analysis (FLTA) is considered the most accurate approach for ... -
Assessment of inherent workload analysis process for digitalisation and effect of further CBM implementation.
(Master thesis, 2022)The unstable geopolitical situation in Europe has caused a high demand for energy resources and significant fluctuations in the price of these. This has affected the backbone of the Norwegian economy, its oil and gas ... -
Assessment of moisture damage in domestic buildings in Norway
(Bachelor thesis, 2021) -
Assessment of necessary airgap of a semisubmersible using a Peak-Over-Threshold long term analysis
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06-10)The airgap of a column stabilized floating structure is the distance from a point on the underside of the deck to the water level instantly and directly below it; when the sea is not calm, it varies with time and for ... -
Assessment of technical building blocks for the development of Leningradskoe field in the Kara Sea
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06-15)As existing oil and gas fields’ productivity is depleting, operators in the oil and gas industry are always searching for new prospects of reserves. Due to this reason, the Arctic shelf is becoming more important than ever, ... -
Asset Digitalization, Change, and Psychological Adaptation: A Study of Human Response Patterns under Integrated Operations
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-06-15)The oil and gas industry is globally and geographically dispersed, some operations are in remote, politically, and economically unstable locations. Therefore, it is critical that companies maintain their production in a ... -
Asset Management in the oil and gas sector - possibilities related to asset management as a management philosophy for offshore assets
(Master thesis, 2015-06)During the period 2008 – 2013, globalization and new business environments created new challenges and a more demanding business context. The oil and gas industry on the Norwegian Continental Shelf, which is one of the most ... -
Asset Management Practices in Norwegian Industrial Sectors
(Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06)Several industrial sectors in Norway have been subjected to challenging industrial conditions in recent years, due to factors such as declining markets and large market fluctuations. On top of these challenging industrial ... -
“Asset Partner” Service model – Challenges and Opportunities for service industry. - A case from Norwegian Continental Shelf (NCS)
(Master thesis, 2023)The oil and gas (O&G) industry is facing numerous challenges, including fluctuating oil prices, increasing regulatory pressures, and a growing demand for cleaner energy sources. To remain competitive and maximize value ... -
Assuring asset integrity through improving the accuracy of leakage source identification of a permanently installed subsea leak detection system using artificial neural networks
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06)Environmental concerns and regulatory controls for oil and gas exploration and production activities have been increasing with the prospecting of deep-water fields and sensitive areas, such as the artic seas. To stop any ... -
At the Crossroads: Multidiscipline Integration and Coordination in an EPC Contract: A Resurgence of Challenges and Strategic Improvement Opportunities
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2012)Over the years, the faculty of Project management contributed excellent methodologies through a set of constituted guidelines that are applicable for smooth execution of projects in every industry. They are broadly based ... -
Automatiseringsalternativer til dyseplateskifte på ekstruderingspresse
(Masteroppgave/UIS-TN-IKM/2009, Master thesis, 2009)Skretting A/S er Norges største fiskefôrprodusent. Produksjonen av fôrpellets foregår i en ekstruderingsprosess. Fôret blir presset ut som strimler gjennom en dyseplate som er montert i fronten på en kvern. Bak dyseplaten ...