Blar i Studentoppgaver (TN-IKM / TN-IMBM) på tittel

Viser treff 162-181 av 1213

    • Bruk av AVA-måler for å studere porestruktur i fersk betong 

      Knutsson, Jon Emil Tobias (Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06-14)
      Alle konstruksjoner som blir bygd ute i Norge vil kunne bli utsatt for frost. Frostbestandighet er en faktor som må tas høyde for under støping av betong ute. I NS-EN206 står det at kravet for frostbestandig betong er ...

    • Bruk av støpte knutepunkt i hovedkonstruksjonen til substasjoner for offshore vindmølleparker 

      Krøvel, Knut P. (Masteroppgave/UIS-TN-IKM/2010;, Master thesis, 2010)
      Denne oppgaven omhandler en analyse av et knutepunkt til den bærende konstruksjonen for en offshore transformator stasjon. Bakgrunnen for dette var å finne ut om det var lønnsomt å bruke serieproduserte støpte eller ...

    • Business Value from Visualisation Technologies 

      Pozniak, Sviatlana (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06)
      Visualization technologies are common in industry. But recently, these technologies have found their applications in Petroleum (Oil and Gas) industry. The Oil and Gas industry constantly strives to increase production ...

    • Bygg- og anleggsprosjekter: en studie av forhold som påvirker tjenesteleveransen 

      Hetlelid, Trond Erik (Masteroppgave/UIS-TN-IKM/2009, Master thesis, 2009)
      Oppgaven søker å gi en forståelse av forhold som har innflytelse på og påvirker kvalitet i tjenesteleveransen i bygge- og anleggsprosjekter. I oppgaven vil man berøre temaer som av ulike grunner ofte er beheftet med ...

    • Byggskader i bygningsdeler på bolighus i Stavanger og Sandnes kommune. 

      Chemak, Karvan (Bachelor thesis, 2021)
      1. Sammendrag En undesøkelse fra Statistisk sentralbyrå (SSB) viser at det ble registrert byggefeil på boliger opptil 20 milliarder kroner hvert år kun i Norge. Det er ofte fuktskader, lekkasjer og feil detaljutførelse ...

    • Bygninger i stål utsatt for jordskjelvpåvirkning : utnyttelse av stålets egenskaper 

      Muratovic, Nevzet (Masteroppgave/UIS-TN-IKM/2009, Master thesis, 2009)
      Hovedmålet med masteroppgaven går ut på å gjennomføre en fordypet analyse av egenskaper til stålmaterialer og utforske mulighetene som ligger i å bruke stålets egenskaper på en optimal måte når en stålkonstruksjon blir ...

    • Capacity of Bolted T-stub Connections Between Different Materials Subjected to Tension and Thermal Load 

      Ydstebø, Kristian (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-14)
      The purpose of this thesis is to study the behaviour of bolted T-stub connections of different materials subjected to tension and thermal load. In the Eurocode, NS-EN 1993-1-8 [1], there are given rules and guidelines for ...

    • Carbon dioxide application for Enhanced Oil Recovery in conditions of the Caspian Sea shelf 

      Vyrodov, Alexandr (Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-06-12)
      CO2 injection into the hydrocarbon-bearing reservoirs is considered as one of the most promising technologies for enhanced oil recovery. This technology has gained significant attention due to its economic benefits as there ...

    • Case Study on Lean Manufacturing 

      Alex Diter Esquivel Tabares (Master thesis, 2022)
      Technological companies are struggling to keep competing in the global market. Customers have higher expectations now that an efficient and high-quality product is no longer sufficient. For example, Laerdal has to offer ...

    • Case Study: Root Cause Analysis at Altus Intervention 

      Steinnes Ivesdal, Jonas (Bachelor thesis, 2021)
      This thesis carries out a case study of Altus Interventions Root Cause Analysis, focusing on the reporting program Synergi and the methodology surrounding it. The central thesis objective is to map the current methodology ...

    • Cement bond evaluation 

      Østerbø, Kristian (Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-15)
      As part of completing an oil well strings of casing are inserted into a pre-drilled hole and cemented in place. The twofold purpose of the cement is to provide casing support and hydraulically isolate the annular space to ...

    • CFD analysis of gas-particle flow in a scaled circulating fluidized bed 

      Engen, Thomas (Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06)
      The hydrodynamics of gas-particle flow in a Circulating Fluidized Bed (CFB) system have been studied computationally. The numerical predictions are evaluated against experimental testing done on a 1/9th scale cold CFB ...

    • CFD Analysis of Internal Pipe Flows 

      Liestyarini, Utari Cendhy (Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06-15)
      The process piping in the refinery plant does not always have straight pipe geometry. The configuration of these pipelines are usually zigzag or snake-like. The pipe fittings or joints including elbow pipes, blind-tee pipes, ...

    • CFD analysis of subsea pipelines and risers. 

      Ivantsiv Alexey (Master thesis, 2021)
      In the master's thesis, an analysis of promising shelf areas in Russia is given for the need to introduce riser systems. The main risers types used in the oil and gas industry are described. The global tasks in work are ...

    • CFD analysis of temperature development due to flow restriction in pipeline 

      Trydal, Jakob (Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-05-29)
      If the pressure difference in a pipe, up- and downstream of a restriction orifice, is above a critical value, the flow becomes choked and an under-expanded jet occurs. For very large pressure differences, the gas experiences ...

    • CFD Analysis of Topographically Induced Turbulence and its Effect on a Fatigue Life Analysis of a Wind Turbine Yaw Gear 

      Halvorsen, Eirik (Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06)
      This master's thesis describes a case study of a turbine farm, where the topography and its effect on turbulence is compared to a fatigue life analysis.

    • CFD investigation of flow through an orifice inside a pipe 

      Nitter, Bjørnar (Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06-14)
      Flow measurement is found in a large variety of industries and for different types of fluids. Orifice flow meters are widely used for measuring the flow rate in pipelines due to its small size in the piping system and ...

    • CFD investigation of fluid flow within elbow pipes 

      Taibi, Ridoan (Master thesis, 2021)
      Elbow pipes are crucial parts of many fluid transport systems, including ones used in the oil and gas industry. The curved shape of such pipes induces centrifugal forces on the internal flow, ultimately affecting the flow ...

    • CFD Modelling of Turbulence around Offshore Structure 

      Nevestveit, Roger Usken (Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06-15)
      Leakages of methane from the seabed is a common problem for oil companies, and they are held responsible for leakages surrounding the platforms at sea. These leakages has to be monitored in some way, and Stinger Technology ...

    • CFD simulation of an offshore air intake and exhaust system 

      Sirevaag, Ola (Master thesis, 2015-06-15)
      The main purpose is to investigate whether the exhaust gases from an offshore turbine can be rerouted to heat the air entering the turbine system, thus keeping air humidity concentration above acceptable levels. To ensure ...