Blar i Studentoppgaver (TN-IKM / TN-IMBM) på tittel
Viser treff 208-227 av 1213
-
Comparative Study and Simulation of Suspension System Using Vehicle Dynamics Simulation
(Masteroppgave/UIS-TN-IMBM/2018;, Master thesis, 2018-06-14)With the increased availability of computing power, simulation tools has become more available for the average user. This has led to a lot of specialized software for most simulation needs. In Formula Student vehicle ... -
Comparative study of deterministic and probabilistic fatigue assessment methods
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)The subject of this thesis is to compare the use of a deterministic and probabilistic assessment methods in fatigue analysis. The thesis focuses on the nominal stress method in the stresslife approach. Three different ... -
Comparative study on global motion of rectangular and circular column semisubmersibles
(Master thesis, 2015-06)A comparative study on the global motion characteristics of two semisubmersible units having similar hull arrangement, but different hull column geometry is carried out. All comparisons are considered at an operational ... -
Comparison of different design guidelines for steel fibre reinforced concrete (SFRC) structures
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06)One of the main reasons for the limited use of steel fibre reinforced concrete (SFRC) in load-carrying structures today is the lack of accepted design guidelines. The Norwegian Concrete Association (Norsk Betongforening) ... -
Comparison of offshore wind profiles using FINO-1 and FINO-3 data
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)The use of wind energy for power purposes has a long history going back to the medieval times. In recent times the wind energy has experienced a great development in both size and the energy output it can produce. Previously ... -
Comparison of spar and semi-submersible floating wind turbine concepts with respect to seasickness of the maintenance personnel
(Master thesis, 2021)Floating offshore wind turbines (FOWTs) are remotely located structures that are operating without humans on board. The technicians are expected to be on board from time to time throughout the life cycle of FOWTs for ... -
Comparison of weather data from FINO3 and ERA5 in Wind Farm Installation Campaign Simulations.
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-06-30)Weather data are commonly used in the planning phase of an offshore wind farm installation campaign. Knowledge of site-specific weather conditions is of great importance regarding transport and installation as well as ... -
Comparison study of deepwater installation methods
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-16)The combination of deeper offshore field developments and larger, more complex subsea structures results in new requirements and challenges for installation vessels and related deployment systems. The conventional vertical ... -
Comparison study of selected uncoupled riser concepts in deep water and harsh environment
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-13)Installing deep water risers in harsh environmental conditions even in the icing environment, in the near future seems like inevitable. Especially in the Norwegian Sea, the development of deep water technology requires an ... -
Comparisons study of S-Lay and J-Lay methods for pipeline installation in ultra deep water
(Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013)The pipeline industry has developed its technical capabilities to enable operations in deeper water. In ultra deepwater developments, the offshore industry has been challenged to solve demanding tasks, to develop new and ... -
Composing of conceptual solutions for the Silurian deposits development of the Prirazlomnoye oilfield in the Pechora Sea
(Master thesis, 2022)Russian Arctic shelf opens broad opportunities for oil and gas fields’ development and hydrocarbon potential for the years to come. Among a number of other fields, the Prirazlomnoye oilfield is a unique one, as it is the ... -
Computational Fluid Dynamics (CFD) Investigations of flow past subsea cover
(Master thesis, 2021)Glass reinforced plastic (GRP) subsea protection covers are often used to protect offshore pipelines, umbilicals and other important subsea structures from dropped objects released from offshore oil and gas and fishing ... -
Computational Fluid Dynamics (CFD) Investigations of Flow-Induced Vibrations of Two Rigidly Coupled Cylinders at High Reynolds Number
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020)Two degree-of-freedom (2-DoF) flow-induced vibrations (FIV) of a single cylinder and two rigidly coupled cylinders are numerically investigated at the Reynolds number of 3.6 × 10^6. Two-dimensional (2D) Unsteady ... -
Computational Fluid Dynamics (CFD) simulation of two-dimensional(2D) cross sectional flow around twin-box girder bridge
(Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-15)Flow around a twin-box bridge with a fixed spacing between the decks has been investigated using the two dimensional (2D) Unsteady Reynolds-Averaged Navier–Stokes (URANS) equations with the k–ω Shear Stress Transport (SST) ... -
Computational fluid dynamics simulation of flying discs
(Master thesis, 2021)This manuscript is divided in two parts. First, a comprehensive review of flight dynamics and disc-wing aerodynamics literature is presented. It discusses the aerodynamic characteristics of circular planform wings and the ... -
Computer Vision in Wind Turbine Blade Inspections: An Analysis of Resolution Impact on Detection and Classification of Leading-Edge Erosion
(Master thesis, 2023)Wind turbines, as critical components of the renewable energy industry, present unique maintenance challenges, particularly in remote or challenging locations such as offshore wind farms. These are amplified in the inspection ... -
Concept design of self-contained remotely controlled running tool
(Masteroppgave/UIS-TN-IKM/2009;, Master thesis, 2011) -
Concept design of self-contained remotely controlled running tool
(Masteroppgave/UIS-TN-IKM/2009;, Master thesis, 2011) -
Concept Evaluation and Analysis of Soft-Landing System for subsea modules
(Master thesis, 2021)The offshore installation is a large process that will face several obstacles, including unpredictable ocean conditions. During the landing stage, the installation platform restricts the movement of the equipment. Furthermore, ... -
Concept evaluation of tethered station keeping system for a mono-hull floating offshore vertical axis wind turbine
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06-14)The objective of this thesis is to perform a concept evaluation of novel station keeping concept for offshore vertical axis wind turbines based on the well-known tension leg platform (TLP) principle. The main characteristic ...