Blar i Studentoppgaver (TN-IKM / TN-IMBM) på tittel
Viser treff 441-460 av 1213
-
Estimering av varmeveksler
(Masteroppgave/UIS-TN-IKM/2010;, Master thesis, 2010)Det har i oppgaven blitt utviklet et regneark for estimering av ”skall og rør”-varmevekslere, av type E-skall med innhold av rette rør og tversgående ledeplater. Det har vært et gjennomgående fokus på å gjøre regnearket ... -
Evacuation and rescue in the Barents Sea, Critical issues for safe petroleum activity
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)3.1 A briefing on the objective of the work All year petroleum activity is not possible in the Barents Sea with regard to emergency preparedness unless sufficient attention is given to critical factors influencing ... -
Evaluating non-destructive testing (ndt) methods used for the inspection of flowlines on offshore production facilities
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)The importance and criticality of the processes and equipments within the Oil & Gas industry highlights the requirement for more reliable, available and maintainable production activities and facilities. These requirements ... -
Evaluating the benefit of PdM on Critical equipment by use of Modelling and Simulation: A case study
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-07-15)Advanced analytics and modelling have been highlighted as key enablers for improved digital life cycle management in the coming digital transformation of the Oil & Gas Industry... -
Evaluating ultrasonic tomography (UT) methods used for the inspection of offshore pipelines
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)In the oil and gas industry, safe and trustable operations of a pipeline system need guidelines for operations and maintenance. These guidelines should be used to optimize the operations by improving product output and ... -
Evaluation of a nonlinear cumulative creep damage model for design applications
(Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-15)Predicting creep damage and remaining life of an engineering design is a complex task. There are many types of creep material models and they provide significantly different predictions. Furthermore, the necessary material ... -
Evaluation of a procedural standard/guideline for the execution of large & offshore projects at Blohm + Voss Repair GmbH
(Masteroppgave/UIS-TN-IØRP/2014;, Master thesis, 2014-06-16)Blohm + Voss Repair GmbH (the company), Hamburg has established a competitive name on the maritime market for repair, conversion and refit performances of cruise vessels, mega yachts and literally all kind of civil and ... -
Evaluation of a top hole full return drilling system applying a concentric dual drill string and an integrated pump
(Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-14)This thesis evaluates the possibility for a full mud return, top hole drilling system, applying a concentric dual drill string and an integrated pump. Top holes are usually drilled without mud return, leaving the cuttings ... -
Evaluation of biomimetic approach to drag reduction of time trial helmet using computational fluid dynamics
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06-15)Computational fluid dynamic (CFD) using OpenFOAM are performed to investigate aerodynamics of a time trial bicycle helmet. Mesh generation by the two softwares OpenFOAM and Pointwise are compared, to detect differences ... -
Evaluation of Ductile Iron for Offshore Application
(Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-15)The possibility of using ductile iron as a construction material for offshore applications have been investigated. If ductile iron is considered as being a substitute material forwelded steel, it can create a larger freedom ... -
Evaluation of environmental conditions in a Norwegian fjord based on field measurements
(Master thesis, 2022)As part of the project “Ferry-free E39”, a 5 km long floating bridge is planned to be built in Bjørnafjorden to replace the existing ferry connection. The demanding nature of the fjord and the sensitivity of the bridge to ... -
Evaluation of fatigue in single sided x – joint welds on Oseberg UWP
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06-15)This report assesses the challenges regarding fatigue calculations on the inside of a single sided weld on the Oseberg UWP. SN – fatigue and FM – fatigue calculations are performed on two different models to establish a ... -
Evaluation of Hybrid Battery System for Platform Support Vessels
(Master thesis, 2017-07-15)In the last few years, the car industry has developed hybrid battery systems with lower battery price, higher capacity and improved safety. These improvements in performance have led to an increased interest to utilize the ... -
Evaluation of jack-up units in deeper water in the North Sea
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-16)The aim of this thesis has been to investigate challenges and possible limitation associated with purpose-built jack-up units for weathering the ultra harsh environment of the North Sea. Two Site-Specific Assessments ... -
Evaluation of local power generation concepts for subsea application
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06)The demand for oil & gas resources is forecasted to continue increasing in the next decades. And, since most of the potential onshore areas for exploration are already under production, most of the new discoveries to be ... -
Evaluation of machine learning for optimization and anomaly detection in offshore drilling operations.
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-07-10)Studies of drilling operation have been focused on control parameter optimization to improve the rate of penetration and mechanical specific energy. Drilling is a complex operation with uncontrolled parameters and disturbances ... -
Evaluation of module handling system on current riserless light well intervention unit to improve up-time
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-16)Riserless light well intervention technology (RLWI) is the latest addition to the subsea light well intervention market. Beginning operation in mid 2005, the technology has the advantage of utilizing a special subsea ... -
Evaluation of risk factors in the interface between engineering and workshop
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-11)IK Norway is a company that is supplying products and solutions for the pipe and pipelines for the oil and gas industry. This is a very conservative industry and IK is relying on good quality in their products and a ... -
Evaluation of SCFs for stiffened tubular joints
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06)In this thesis the field of stress concentration factors for use in fatigue analysis is explored. The focus is on stiffened tubular joints, which are common on offshore structures. An analysis methodology is established ... -
Evaluation of synergetic effects of integrated recirculating aquaculture systems with water electrolysis units
(Master thesis, 2022)Recirculating aquaculture systems (RAS) are developing rapidly as a pathway towards a more sustainable and efficient aquaculture industry. Such facilities allow for precise control of parameters involved in fish farming, ...