Blar i Studentoppgaver (TN-IKM / TN-IMBM) på tittel
Viser treff 462-481 av 1213
-
Evaluation of the potential for automation and robot technology, with focus on condition monitoring on static systems for topside offshore facilities.
(Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-07)Digitalization has become one of the most important development areas across industries and work processes. We know that this also has high focus in the oil industry today. Therefore, my contribution would be to try to see ... -
Evaluation of TOC concept in industrial wastewater at SART AS
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)Approximately 98 % of the industrial wastewater that SART receives comes from offshore activities. Unlike municipal waste water, this wastewater contains relatively high Total Organic Carbon (TOC), and very little Nitrogen ... -
Evaluering av Petroleumstilsynet sitt arbeid med å redusere sannsynligheten for og konsekvensene av en storulykke i petroleumsnæringen på land i henhold til intensjonen i Sevesodirektivet
(Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013)Etter en rekke hendelser med farlige kjemikalier på 1970-tallet utarbeidet EU i 1982 Sevesodirektivet, oppkalt etter en industriulykke i byen Seveso i Italia i 1976 som førte til et større utslipp av dioksiner til luften. ... -
Expanding PIN system – Combined radial and axial locking system
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-07-15)In the side by side plate joints or flange joints, the standard practice is to have a bolted connection that provides the axial clamping load as well as, avoiding any radial or rotational movement. This can be problematic ... -
Experimental and Analytical analysis of pipeline rotation with residual curvature during installation
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06-29)Pipelines are some of the main components of the production and transportation of hydrocarbons in offshore Oil & Gas Industry. The design, installation and operation of pipelines involve many challenging tasks. The recent ... -
Experimental and numerical crack form simulations of reinforced concrete beam
(Masteroppgave/UIS-TN-IMBM/2018;, Master thesis, 2018-06-15)In this thesis, the Concrete Damage Plasticity module in Abaqus is used to determine crack propagation and crack width with a 3d solid model, and a 2d shell model. Data is given by previous experiments where 6 concrete ... -
Experimental evaluation of the axial capacity of cracked tubular member
(Bachelor thesis, 2021)This thesis experimentally investigated the compressive axial capacity of cracked tubular members. Then compared it to NORSOK N-004 (Standard Norge 2004) formulae. Further, the test results were compared with other analytical ... -
Experimental investigation of accidental drops of drill pipes and containers during offshore operations
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-25)The dynamic motion of falling pipes in water is treated theoretically using slender body theory at present time. This thesis focuses on the experimental investigation of accidentally falling drill pipes and to some extent ... -
Experimental Study and Optimization of Expanding Pin Technology for Heavy Duty Machine Joint Application
(Master thesis, 2021)In this thesis, a type of pin joint, namely Bondura Expanding Pin System (EPS) is subject of study which has ability to create a rigid and reliable connection. This joint system is specially designed for heavy duty machines ... -
Experimental Test and Numerical Analysis of Pipeline Rotation due to Residual Curvature during Installation
(Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-15)In the oil and gas industry, subsea pipeline plays a very important role in the transportation of the crude oil between subsea production system (SPS) components and from seabed to the offshore platform/facility, or from ... -
Experimental testing of the new wind tunnel at the University of Stavanger
(Bachelor thesis, 2023)This thesis aims to gain experience in using the newly installed CTO S.A open circuit wind tunnel at the University of Stavanger. Extensive research has been done on the topics of wind tunnel use, general aerodynamics, ... -
Experimental testing of the new wind tunnel at the University of Stavanger
(Bachelor thesis, 2023)This thesis aims to gain experience in using the newly installed CTO S.A open circuit wind tunnel at the University of Stavanger. Extensive research has been done on the topics of wind tunnel use, general aerodynamics, ... -
Exploration on optimizing maintenance management by using condition monitoring on drilling platforms in COSL
(Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013)Taking a general investigation of maintenance activities in various industries, three maintenance philosophies are commonly applied, which are corrective maintenance, time-based periodic maintenance and condition-based ... -
Exploratory Study: Implementation and Applications of Extended Reality
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06-12)It is well known that the construction industry has the potential to increase its productivity. It is also well known that a solution can be to assess decisions made early in a project more thorough, as these decisions ... -
Exploring Cloud Adoption Possibilities for the Manufacturing Sector: A Role of Third-Party Service Providers
(Master thesis, 2023)As the manufacturing sector strides towards digitalization under the influence of Industry 4.0, cloud services have emerged as the new norm, driving change and innovation in this rapidly transforming landscape. This study ... -
Exploring the competitive state of practices in a project environment: issues, challenges and recommendations based on an industrial case
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-06)Actors in the Norwegian oil and gas sector are under siege. Competitive positions are being challenged and many companies experience fundamental issues in terms of profitability, efficiency and order inflow. In parallel, ... -
Exploring the feasibility of installing Smart-Kite's airborne wind energy system on commercial ships
(Master thesis, 2021)On the issue of climate change, which is one of the biggest problems of the century we live in, measures are being taken at the level of states. The importance of decarbonization in the road map drawn on this subject is ... -
Extended Reality for the Energy Sector: A Case of a Norwegian Company
(Master thesis, 2022)Extended Reality (XR) is a promising disruptive technology that has significant implications for the digital transformation in industrial sectors. The term “Extended Reality” is an umbrella term for existing immersive ... -
Extended use of Jack-Up in Marine Operations
(Master thesis, 2023)This paper discusses an approach for the identification of the characteristic responses of jack-up structures during the different phases of using jack-ups (i.e., transport, installation, operations, and retrieval). The ... -
Extension and modification of anticipatory failure determination approach based on I-TRIZ
(Master thesis, 2014-06-16)Anticipatory failure determination, abbreviated as AFD, is qualitative risk analysis approach that is based on I-TRIZ, a Russian short form of theory of inventive problem solving. Although this approach comprises two ...