Blar i Studentoppgaver (TN-IKM / TN-IMBM) på tittel
Viser treff 30-49 av 1213
-
A study of wireline and downhole position control for riserless light well intervention in deep water
(Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013)The light well intervention for subsea wells using riserless method has been carried out extensively over the last 10 years to increase the oil and gas recovery from depleted wells. Riserless Light Well Intervention (RLWI) ... -
A study on effect of tendon layouts in post-tensioned flat slabs
(Masteroppgave/UIS-TN-IMBM/2018;, Master thesis, 2018-06)The use of post-tensioned flat slabs is sufficient when large spans or thin floors are desired. The most used system today is to place unbonded tendons concentrated over the supports in one direction and distribute them ... -
A study on engineering critical assessment (ECA) of subsea pipeline girth welds for reeling installation
(Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013)Reeling is offshore pipeline installation method which delivers fast and cost effective pipeline laying. Each of the pipeline segment are welded onshore, the long section of pipeline then spooled onto a large diameter of ... -
A study on how to improve the flow efficiency without decreasing the resource efficiency through continuous improvement
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06)The oil crisis in 2014 forced the oil and gas companies to reduce their spending and increase focus on streamlining their work. Even though there has been an upturn in the oil price since 2014, many companies still find ... -
A study on ship-bridge collisions and the significance of the collision energy and impact angle for the probability of collapse
(Master thesis, 2022)Bridges are a necessity for transportation across waterways in modern society, and the passing of large ships below bridges poses the risk of ship-bridge collision, which can, in the worst case, lead to the total collapse ... -
A Study on the Development and Implementation of a Retrofit Predictive Maintenance System Onboard a Container Vessel
(Masteroppgave/UIS-TN-IMBM/2018;, Master thesis, 2018-06)As industry 4.0 have gained momentum, a maintenance approach first introduced in the 1960’s has been reborn into the age of connectivity. Previously constrained from showing its true potential by limitations in technology, ... -
A subsea development, flowlines and flow assurance
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)Oil and gas exploration on the Norwegian Continental Shelf has been going on since the 1960. Many smaller oil fields have been found and at that stage they have not been developed, because alone they have not been economically ... -
A work process model for PdM evaluation in study phase: A case study
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06)To a large degree, the fluctuation in oil prices has forced Oil & Gas (O&G) companies to invest in technologies that can aid lower costs and mitigate risk. This financial stability depends on a big extent on the performance ... -
Accurate predictions of the Ultimate Limit State Wave Loads on Bottom Fixed Wind Turbine
(Master thesis, 2022)In this project the breaking wave loads on a bottom fixed monopile has been determined with the use of the Pressure Impulse Model. The pressure impulse model is the integral of pressure dependent by time during a short ... -
Accurate Predictions of Ultimate Limit State Wave Loads on Bottom Fixed Wind Turbine
(Master thesis, 2021)The breaking wave loads on a bottom fixed monopile foundation has been determined in this project with the aid of a Pressure Impulse Method. The pressure impulse method is the integration of pressure bounded by time within ... -
Acoustic Emission Testing for offshore jacket structures
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06-14)Structural health monitoring (SHM) is a critical tool to assess the structural integrity of many applications. Early detection for damage can extend the lifetime for structures through replacing damaged parts and can lower ... -
Adaptation of circular economy concept into building design process
(Master thesis, 2021)Circular economy (CE) is an economic system that is restorative and regenerative by design and aims to keep products, components, and materials at their highest utility and value always, distinguishing between technical ... -
Additive manufacturing and material characterization of H13 tool steel
(Bachelor thesis, 2022) -
Aerodynamic modifications of tall buildings to mitigate wind response
(Bachelor thesis, 2021)During the last century, there has been a huge development in the field of wind engineering. Wind tunnel testing in combination with CFD has made it possible for engineers to build tall irregular buildings. Today, Burj ... -
Aerodynamic modifications of tall buildings to mitigate wind response
(Bachelor thesis, 2021)During the last century, there has been a huge development in the field of wind engineering. Wind tunnel testing in combination with CFD has made it possible for engineers to build tall irregular buildings. Today, Burj ... -
Aeroelastic behavior of very long span suspension bridges
(Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013-06-17)The main purpose of this assignment has been to obtain and understanding of the challenges concerning a future very long span suspension bridge across Sognefjorden. I have through studies of existing literature and similar ... -
Ageing of ships, LPG tankers
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2015-01-15)During the last decades there have been several major ship accidents, and it is believed that old ships are more unsafe than newer ships. To get a better understanding of this phenomenon the thesis is investigating different ... -
Aldring og levetidsforlengelse av broer i stål
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-16)Denne rapporten omhandler aldring og levetidsforlengelse av broer i stål. Det er gjennomgått relevant teori angående levetidsproblematikk og degraderingsmekanismer til broer i stål. Det er i tillegg vurdert effekten vind ... -
Algorithms-Aided Design utilized in Structural Design
(Master thesis, 2021)For long, productivity within the construction industry has comparatively fallen in contrast to its sister engineering fields(Teicholz 2004). Structural engineers, which are tasked with producing precise and reliable ... -
Alpha factors for the calculation of forecasted operational limits for marine operations in the Barents Sea
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)The execution of marine operations often depends on the wave heights being low enough for safe operations. This needs to be the case for the time the operation takes. Weather forecasts are used to predict the wave heights. ...