Blar i Studentoppgaver (TN-IKM / TN-IMBM) på tittel
Viser treff 1039-1058 av 1214
-
Structural reliability and optimal design of fixed jacket of offshore wind turbine
(Master thesis, 2021)The assessment of structural reliability for offshore wind turbines (OWTs) is challenging. The environmental conditions and loads on a wind turbine have large variability. Wind and wave act simultaneously on the structures, ... -
Structural resistance safety level in Eurocode versus NORSOK and ISO
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012-06-14)The objective of this thesis is to analyze and compare the capacity limits, hence the inherent safety level for the actual structure, using various standards and regulations such as Eurocode, NORSOK and ISO. The main tool ... -
Structural Response Analysis of a Composite Multirotor Airframe
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06-15)In this work, finite element analyses determine the modal frequencies and relative stiffness of two multirotor airframes---the Camflight FX-8 and its water-resistant variant BG-200. Details of the analysis ... -
Structural response of timber-concrete composite slabs: Effect of shear fasteners with different spacings and orientations.
(Bachelor thesis, 2023)Abstract This thesis investigates the structural response of timber-concrete composite (TCC) slabs, with a specific focus on the influence of shear fasteners. The primary objective is to investigate the load capacity of ... -
Structural response of timber-concrete composite slabs: Effect of shear fasteners with different spacings and orientations.
(Bachelor thesis, 2023)This thesis investigates the structural response of timber-concrete composite (TCC) slabs, with a specific focus on the influence of shear fasteners. The primary objective is to investigate the load capacity of TCC with ... -
Structural robustness and earthquake resistant design
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)The subject of the thesis is evaluation of possible modification of the structures dynamic characteristics, within the context of increasing its level of robustness and resistance to earthquake actions. The idea and suggested ... -
Strukturell ytelse av en jernbanefagverksbromodell: Design
(Bachelor thesis, 2022)Jeg startet oppgaven med å finne informasjon og lese meg opp på broer. Alt fra de forskjellige type broene som finnes, hvordan aluminium blir til og hvordan den reagerer under last. Veileder og jeg ble enige om å bruke ... -
Strukturell ytelse med bruk av krysslaminert tre i bæresystem
(Bachelor thesis, 2021)Krysslaminert tre (KLT) har de siste årene blitt et populært byggemateriale i deler av den vestlige verden. Tre er vanligvis lite motstandsdyktig for laster vinkelrett på fiberretningen, men den krysslimte strukturen til ... -
Strukturell ytelse med bruk av krysslaminert tre i bæresystem
(Bachelor thesis, 2021)Krysslaminert tre (KLT) har de siste årene blitt et populært byggemateriale i deler av den vestlige verden. Tre er vanligvis lite motstandsdyktig for laster vinkelrett på fiberretningen, men den krysslimte strukturen til ... -
Studie av Soma Øst-bru
(Masteroppgave/UIS-TN-IMBM/2018;, Master thesis, 2018-10-31)Rapporten studerer forskjellen i krefter og armering for 4 slakkarmerte bruer, disse er modellert som skall- og bjelkemodeller. Bruene har en konstant bredde (B) på 5 meter, sidespennet for bruene skrives som 0.6875*L, ... -
Studie av spenning i bruddgrensetilstand for etter-oppspente rektangulære bjelker med intern ubundet kabel.
(Master thesis, 2021)The use of unbounded tendons as a prestressing technique in the design and rehabilitation of concrete slabs / beams has in recent years been preferred due to its simple construction design, cost efficiency and maintenance ... -
Studie om Ammoniakk som energibærer på skip og offshoreinstallasjoner.
(Bachelor thesis, 2022)I denne bacheloroppgaven ble det sett på ammoniakk og LNG som energibærere til fartøyer og offshoreinstallasjoner som fremtidens drivstoff. Ammoniakk er under utprøving, mens LNG er allerede et etablert drivstoff. For å ... -
Studies in damage detection using flexibility method
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)Structural health monitoring (SHM) is a way of implementing a system that can monitor, and provide data to help engineers secure the integrity of different structures like civil infrastructure, bridges, offshore structures ... -
Study of Acergy`s supplier database
(Masteroppgave/UIS-TN-IKM/2009;, Master thesis, 2011)Acergy Norway AS is a seabed-to-surface engineering and construction company for the offshore oil and gas industry worldwide. They deliver services in many market segments such as Inspection and Maintenance and Repair ... -
Study of DataOps as a concept for Aker BP to enable data-driven assets.
(Master thesis, 2022)The oil and gas industry have faced many obstacles over the decades and in recent years the industry has had to endure increased pressure from the market, a global crisis caused by the coronavirus and oil prices reaching ... -
Study of dynamic response of a suspension bridge in relation to recorded traffic-induced acceleration
(Master thesis, 2023)This master's thesis is the final work of my master’s degree in structural and material science at the University of Stavanger and marks the ending of 5 consecutive years studying engineering. This thesis aims to investigate ... -
Study of lifting operation of a tripod foundation for offshore wind turbine
(Master thesis, 2017-06)Marine lifting operations play a key role in the installation of turbines and bottom-fixed foundations. Offshroe installations of the bottom-fixed foundations, tripod foundation in this study, are costly and risky due to ... -
Study of medical image data transformation techniques and compatibility analysis for 3D printing
(Master thesis, 2022)Various applications exist for additive manufacturing (AM) and reverse engineering (RE) within the medical sector. One of the significant challenges identified in the literature is the accuracy of 3D printed medical ... -
Study of production tolerances' effect on capacities with regards to EN-1999
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06-14)The goal of this thesis was to investigate the effect that production tolerances has on the strength capacities of a beam or column. The out-of-straightness imperfection on a pinned column, and its effect on the flexural ... -
Study of the Characteristics of Acoustic Emission Signals.
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-07-15)This report aims to study the characteristics of signals collected by Acoustic Emission Testing (AET) and categorize them into types to detect yield. A literature survey of existing knowledge of AET and Acoustic Emission ...